Load Distribution Analysis
Calculates the load on each standard according to EN 12811 standards.
E-E-A-T & EN 12811 CERTIFIED
DetaPlan: Smart Scaffolding Design & Calculator
Free 3D visualization, Layher compatible BOM, and static risk analysis engine compliant with EN 12811-1.
Estimated Bill of Materials (BOM)
| Ref | Element Description | Birim (kg) | Quantity | Toplam (kg) |
|---|---|---|---|---|
| 2617.300 | Vertical Standard (Flanged) | 13.7 | 136 | 1863.2 |
| 2602.000 | Starting Collar | 1.4 | 34 | 47.6 |
| 2601.257 | Horizontal Ledger | 9.4 | 406 | 3816.4 |
| 2601.073 | Horizontal Ledger | 3.2 | 78 | 249.6 |
| 2640.257 | Horizontal Ledger | 9.4 | 150 | 1410 |
| 3812.257 | Steel Platform | 17.4 | 75 | 1305 |
| 4001.060 | Base Jack | 3.6 | 34 | 122.4 |
| 2620.307 | Diagonal Brace | 13.5 | 54 | 729 |
| 2642.257 | Toe Board | 5.8 | 75 | 435 |
| 2630.001 | Access Ladder | 18.5 | 22 | 407 |
| 3867.000 | Cover Strip | 4.5 | 75 | 337.5 |
| - | Gerdirmeli Bağlantı Sistemi Endüstriyel tankların izolasyon bütünlüğünü korumak amacıyla, duvar ankrajı yerine TS EN 12811 standartlarına uygun "Free-standing ring" (gerdirmeli) bağlantı sistemi hesaplanmıştır. | - | 12 Takım | - |
Engineering Commentary
- Rüzgar Kuvveti (EN 1991-1-4): 150.7 kN
- Gerçek Akor Boyu: 2.569 m
- UYARI: Boşluk > 15cm. Gap Deck kullanın!
- Preliminary evaluation engine based on EN 12811-1 principles. Detailed static project is mandatory for complex structures.
DETA 3D ENGINE v2.03D REAL-TIME
Engineering Analysis Results
Total Static Load
10.723kg
Korda Hatası (e)
0.1cm
Kule Adedi (N)25 Ünite
Merdiven Kulesi2 Adet
STATIC CALCULATION REQUIRED
Why Use the Smart Scaffolding Tool?
Scaffolding installation is not just about joining pipes. It is an engineering process where wind loads, ground pressure, and dynamic loads are calculated.
Wind Load Impact
Analyzes the overturning risk of the scaffolding based on height and location.
BOM Optimization
Uses a smart material matching algorithm to minimize waste rates.
International Standards & Compliance
DetaPlan has an engineering core based on global industrial standards. All calculations are verified according to TS EN 12811-1 and OSHA requirements.
TS EN 12811-1OSHA StandardsStatic Analysis
ENDÜSTRİYEL EPC OTORİTESİ
Deta Endüstri:
İskeleden Mekaniğe Tam Çözüm
DetaPlan sadece bir hesaplama aracı değil, Deta Endüstri'nin İskele, İzolasyon, Endüstriyel Boya ve Mekanik Tesisat alanlarındaki mühendislik gücünün dijital bir yansımasıdır. Türkiye'nin ve dünyanın en zorlu şantiyelerinde "Sıfır Risk" ve "Maksimum Verimlilik" ilkeleriyle hizmet veriyoruz.
Frequently Asked Questions
TEKNİK DOKÜMANTASYON
User Guide & Technical Documentation
Explore our comprehensive engineering guide on our scaffolding design engine's working principles, TS EN 12811 standards, and safety analysis.
Digital Engineering